ALUJET Mounting Adhesive WAL 600 ml - The strong hold for your airtight vapor barrier

Have you ever been frustrated by leaks in your vapor barrier? Faulty sealing to masonry is the most common cause of structural damage and mold. If the airtightness isn't right, heat escapes and moisture penetrates the insulation. Here's the solution: ALUJET WAL assembly adhesive in a convenient 600 ml sausage pack. This adhesive was specially developed to securely and permanently bond vapor barrier membranes to mineral substrates such as concrete or plaster.

Whether you're a professional on a large construction site or a dedicated DIY enthusiast, you need a material that bonds instantly and won't give way. Alujet Wal mounting adhesive is solvent-free and odorless, making it perfect for interior finishing. The 600 ml pack allows you to cover a significant area and ensures your home remains at the highest energy efficiency level. Trust a system that delivers on its promises.

Why is ALUJET WAL assembly adhesive the best choice for you?

Conventional adhesives often reach their limits when faced with building physics requirements. ALUJET assembly adhesive, on the other hand, is a true specialist for airtight sealing. It solves the problem of difficult connections on rough surfaces.

Extreme initial adhesion without mechanical fixation

Do you know that feeling? You press the foil down, and it slips off again. With Alujet Wal mounting adhesive, that won't happen. Thanks to its high viscosity, the membrane adheres instantly to the masonry. This saves you time and hassle, as in most cases you can do without additional battens for fixing.

Permanently elastic for maximum safety

Buildings expand and contract – wood moves, concrete contracts. A rigid adhesive would fail in this situation. This assembly adhesive remains permanently elastic. It accommodates the building's movements without compromising airtightness. This ensures your attic remains protected for decades.

Environmentally friendly and health-conscious

Since you spend a lot of time indoors, a healthy living environment is crucial. WAL adhesive is a water-based dispersion, completely solvent-free. This means no pungent odors during application and a healthy indoor climate for the occupants.

Technical data: ALUJET assembly adhesive

• Product: ALUJET assembly adhesive WAL

• Contents: 600 ml pouch

• Base: Water-based dispersion

• Application: Bonding of vapor barrier membranes to rising masonry

• Properties: Solvent-free, permanently elastic, high initial adhesion
  

• Processing temperature: +5°C to +40°C

• Storage: Store frost-free!

• Coverage: Approx. 10-12 linear meters per tube pack (with 8 mm bead)

• Color: Light green/blue (for better control of the order)

Applications and areas of use

The Alujet Wal mounting adhesive is a true all-rounder when it comes to protecting your building structure. It covers all critical points of the airtight layer.

1. Masonry connections: Securely connect vapor barriers made of PE, PA or PP to concrete, brick or aerated concrete.

2. Renovation in old buildings: Ideal for sticking foils to uneven, mineral surfaces where adhesive tapes often fail.

3. Overlaps: Also suitable for supporting difficult foil overlaps in the area of ​​penetrations.

Although the WAL dispersion-based adhesive is perfect for standard construction, some people also look for an Alujet bit- based mounting adhesive for extreme outdoor conditions. However, the WAL offered here is the first choice for interior finishing and ecological construction, as it does not emit any harmful fumes.

This is how easy it is to use the ALUJET WAL mounting adhesive

The application in the tube pouch is not only more environmentally friendly (less waste than cartridges), but also very efficient.

• Preparation: The surface must be dry, dust-free, and grease-free. Remove any loose plaster residue.

• Application: Cut open the front of the sausage pack and use a suitable gun. Apply a bead approximately 8 mm thick to the masonry.

• Bonding: Place the vapor barrier onto the bead of adhesive with a relief loop (to compensate for movement).

• Important: Do not flatten the adhesive! The bead must remain approximately 2-3 mm thick so that it can remain permanently elastic.

Why should you buy from Keuck building materials?

We are your partner for quality in construction. When you order from us, you get more than just a product:

• Lightning-fast shipping: We know there are no breaks on the construction site. We ship immediately from stock.

• Expert advice: Do you have questions about compatibility with your film? Our team will be happy to help.

• Top conditions: As a specialist retailer, we offer you ALUJET assembly adhesive at fair prices.

• Secure shopping: We stand for trust and quality - for many years in the industry.

ALUJET Mounting Adhesive - FAQ (Frequently Asked Questions)

Q: Can I use the adhesive in freezing temperatures?

A: As this is a water-based dispersion adhesive, it should not be used in freezing conditions. The ideal temperature is above +5°C. Also, ensure that the adhesive is stored in a frost-free environment to maintain its adhesive strength.

Q: Does WAL also adhere to OSB boards?

A: Yes, the alujet WAL mounting adhesive adheres excellently to wood-based materials such as OSB. It is ideal for creating airtight seals between different materials.

Q: What is the difference between the WAL and the Alujet mounting adhesive bit?

A: The WAL is water-based and solvent-free – perfect for indoor use. An Alujet mounting adhesive bit is bitumen-based and is often used where extreme humidity or outdoor applications are the primary concern. For traditional vapor barriers, the WAL is the more modern and healthier solution.

Q: How long does the adhesive need to dry?

A: Skin formation begins after approximately 15-30 minutes. Complete curing depends on the humidity and the absorbency of the substrate; it usually takes 24 to 48 hours.

Q: Do I need a special gun for the sausage pack?

A: Yes, you need a standard tubular skeleton gun for 600 ml sausage packs. These are very robust and allow for fatigue-free work.

Conclusion: Prioritize safety in construction

An airtight building envelope is not a luxury, but a necessity. With ALUJET WAL 600 ml assembly adhesive, you don't have to compromise. It offers the necessary protection against structural damage and ensures efficient thermal insulation. Rely on the easy application in the foil pack and the exceptional adhesive strength on mineral substrates.

Order from Keuck-Baustoffe today and make your building winter-proof and energy-efficient!