The GKB gypsum board in the format 2000 × 1250 × 12.5 mm is a standard type A gypsum board according to DIN EN 520 for wall and ceiling cladding, stud walls, and partition walls in interior spaces without special requirements. With 2.50 m² per board, you can cover larger areas with fewer joints. The boards are sold individually; a pallet contains 50 boards.
It is aimed at drywall contractors and interior finishing companies who want to economically clad larger wall and ceiling areas in dry interior spaces; you can find other formats and board types in our plasterboard category .
Typical applications and points you should clarify before buying:
With 2.50 m² per panel, you can cover large areas with few joints, which reduces the amount of filling required compared to narrow formats.
Crucial factors are the room's requirements for moisture and fire protection, as well as the transport routes on the construction site.
For type A, DIN EN 520 does not specify a limited water absorption; the impregnated GKBI board in the same format is suitable for domestic bathrooms and kitchens .
Where stairwells are narrow or when installing alone, the GKB board 2000 × 600 × 12.5 mm with 1.20 m² per board is more manageable.
Install the panel according to DIN 18181 on a substructure whose grid matches the panel width. The product page does not specify the manufacturer, edge profile, or fire behavior; for fire protection requirements, the panel selection must be based on the verified system documentation.
The information is taken from the article description and the requirements of DIN EN 520; the article page does not specify the manufacturer, edge shape, basis weight and fire behavior.
| Product type | Plasterboard (plasterboard) |
| Plate type European | Type A according to DIN EN 520 |
| Plate type national | GKB according to DIN 18180 |
| Length × Width | 2000 × 1250 mm |
| thickness | 12.5 mm |
| Area per plate | 2.50 m² |
| Sales unit | 1 piece (single plate) |
| Pallet quantity | 50 panels (calculated as 125 m²) |
| Dimensional tolerances | Length +0/−5 mm, width +0/−4 mm, thickness ±0.5 mm (DIN EN 520) |
| Area of application | Interior spaces, walls and ceilings, without special moisture or fire protection requirements |
| processing | On substructure according to DIN 18181 |
| Item number (Shop) | 6418 |