POINT 430 Vinyl Fix Injection Mortar 300 ml – styrene-free composite mortar based on vinyl esters
POINT 430 Vinyl Fix is a styrene-free, two-component, vinyl ester-based injection mortar for anchor rods and reinforcing steel. According to the manufacturer, it is ETA-09/0140 certified for cracked and uncracked concrete, is also suitable for solid and hollow masonry as well as wood, and can be used in wet or water-filled boreholes.
Who is injection mortar suitable for?
The mortar is aimed at assembly, metal construction and structural engineering companies as well as experienced DIY enthusiasts who want to securely anchor railings, brackets, canopies or connecting reinforcement in concrete or masonry; you can find further adhesive and assembly products in our construction chemicals category .
Areas of application and selection criteria
Typical uses and points to check before processing:
- Anchor rods M8–M30 in uncracked concrete
- Anchor rods M10–M20 in cracked concrete
- Reinforcing steel Ø 8–32 mm, also used as connecting reinforcement
- Solid masonry M8–M16, perforated masonry M8–M12 with sieve sleeve
- Wood M8–M16
- Substrate temperature −10 to +40 °C, cartridge minimum +5 °C
- Thoroughly blow out and brush out the borehole.
- Design of load-bearing fixings according to the ETA by specialist planners
Your advantage when buying
According to the manufacturer, the cartridge can be resealed and reused with a new static mixer; another POINT product for fast bonding is the POINT 501 FIX EXPRESS adhesive with activator .
What you should pay attention to when making your selection
The substrate, anchor diameter and load are crucial, as the scope of approval and setting parameters differ depending on the application.
Approvals and performance characteristics
The manufacturer specifies ETA-09/0140 for anchor rods, ETA-09/0246 for retrofitted reinforcement, seismic ratings of categories C1 and C2, and a fire resistance of up to R240.
Processing and curing times
According to the data sheet, at 20 °C there are approximately 7.5 minutes for processing, the curing time is 40 minutes; at 0 °C it is 45 minutes and 7 hours.
Processing and application limits
Discard the first application of mortar until the color is uniform, fill the borehole to about two-thirds and insert the rod with a rotating motion; only load after complete hardening.
Product features at a glance
Technical data: POINT 430 Vinyl Fix injection mortar
The most important information for selection and processing at a glance; the values are taken from the technical data sheet and the product page of TEGRA STATE.
| Manufacturer | UAB TEGRA STATE, brand POINT |
| Article numbers and EAN | Manufacturer 03-2-0-430; Shop 12030; EAN 4772012008249 |
| Product type | Styrene-free 2-component injection mortar based on vinyl ester |
| Content and color | 300 ml cartridge; mixed grey |
| Ratings according to the manufacturer | ETA-09/0140 (anchor rods); ETA-09/0246 (reinforcement connections) |
| Anchor rods in concrete | M8–M30 uncracked; M10–M20 cracked |
| Other substrates | Solid masonry M8–M16; Perforated masonry M8–M12; Timber M8–M16; Reinforcing steel Ø 8–32 mm |
| Earthquake and fire | C1 (M12, M16, M20), C2 (M12, M16); Fire resistance up to R240 according to ETA-09/0246 |
| Processing and curing time | 20°C: 7.5 min / 40 min; 10 °C: 16 min / 1 h; 0 °C: 45 min / 7 h |
| Temperatures | Substrate temperature -10 to +40 °C; cartridge temperature min. +5 °C |
| Example of setting M12 in concrete | Drill hole Ø 14 mm; anchoring depth 80–240 mm; tightening torque 40 Nm |
| storage | Store upright, dry, at +5 to +30 °C; 15 months from the date of manufacture |
FOME FLEX Black Edition professionelle Schaumpistole
FOME FLEX Black Edition professionelle Schaumpistole
POINT Ultra High tack Kartuschenspritze, Kraftsteigerung
POINT Ultra High tack Kartuschenspritze, Kraftsteigerung
Zahlarten
Versandpartner
Baustoffe online kaufen bei Keuck Baustoffe
Keuck Baustoff GmbH & Co.KG.
ÖFFNUNGSZEITEN
Suchen Sie nach mehr
