Who are the white REV cable ties 300 × 4.8 mm suitable for?

They are aimed at electricians, tradespeople and DIY enthusiasts who want to bundle and fasten many cables or wires in a uniform manner; further connection and fastening materials can be found in our Electrical Installation category .

Areas of application and selection criteria

According to the manufacturer, the cable ties are intended for the following applications; the test points help with selection:

• Bundling of cables and wires
• Attach and fix to suitable holding points
• Application area: indoor and outdoor
• Operating temperature from −10 °C to +85 °C
• Tensile strength of 220 N according to the manufacturer
• Adjust the bundle circumference to a length of 300 mm.
• Check UV suitability beforehand if exposed to prolonged sunlight.
• Work on power lines should only be carried out when the power is off.

Your advantage: suitable for indoor and outdoor use

REV specifies the application area as indoors and outdoors, so you can combine cable groups in buildings and outdoors with one pack; you must clarify suitability for permanent sunlight separately.

Choose the correct length and width

The length and bandwidth of the cable tie determine the bundle size and load capacity it can handle.

300 mm or longer

For larger bundles, there are REV cable ties 368 × 4.8 mm white ; a portion of the strap length is always required for closing.

4.8 mm or wider

For higher holding forces, we offer the REV cable ties 380 × 7.6 mm with a tensile strength of 500 N according to the manufacturer.

Storage and limits

REV specifies a storage temperature of 0 to +25 °C. The tensile strength rating does not constitute approval for lifting loads or for safety-relevant fastenings.

Product features at a glance

Technical specifications: REV cable ties 300 × 4.8 mm, white

The information is taken from the manufacturer's data sheet from REV Ritter for item no. 0508271555.