Who are the REV cable ties 368 × 4.8 mm suitable for?

They are aimed at electricians, tradespeople and DIY enthusiasts who bundle and fasten cables, wires or insulating tubes in larger numbers; further connection and fastening material can be found in our Electrical Installation category .

Areas of application and selection criteria

According to the product information, the cable ties are intended for the following applications; the test points help with selection:

• Bundling of cables and wires
• Securing insulating pipes
• Securing cables to suitable holding points
• Do not exceed a tensile load of 22 kg.
• Match bundle circumference with a length of 368 mm
• For heavier loads, choose wider cable ties.
• Check UV suitability beforehand if exposed to prolonged sunlight.
• Work on power lines should only be carried out when the power is off.

Your advantage: 100 binders for many identical bundles

With 100 pieces in a pack, you have enough similar ties on hand for recurring bundling and fastening work without having to buy several small packs.

Choose the appropriate binder size

Length, bandwidth and tensile strength determine for which bundles and loads a cable tie is suitable.

Length and bundle circumference

With a length of 368 mm, the binder is sufficient for medium-sized bundles; a portion of the band length is required for secure closure.

Narrow or wide

For higher holding forces, we offer the REV cable ties 380 × 7.6 mm with a tensile strength of 500 N according to the manufacturer.

Installation and limitations

The tensile strength rating does not constitute approval for load-bearing or safety-relevant fastenings; suitable fasteners must be selected for these applications. Work on electrical lines must only be carried out when de-energized.

Product features at a glance

Technical specifications: REV cable ties 368 × 4.8 mm, black

The information is based on the product data for REV item no. 0508300555; a manufacturer's data sheet was not available.