Who is the REV WAGO Compact 4-way clamp suitable for?

It is aimed at electricians who want to connect multiple single-wire conductors of fixed installations in junction boxes in a space-saving manner; further connection material can be found in our Electrical Installation category .

Areas of application and selection criteria

Typical uses and points to check before buying:

• Connections in junction and installation boxes
• Connect up to four single-wire copper conductors
• Conductor cross-sections from 0.5 to 2.5 mm²
• According to the data sheet, only for single-wire conductors
• Maintain a stripping length of 11 mm.
• All four terminals are at the same potential.
• Note the maximum ambient temperature of 60 °C.
• Work on power lines should only be carried out when the power is off.

Your advantage: flat design for full cans

With a height of only 5.8 mm, there is more space in well-filled cans, and the transparent housing shows whether each conductor is fully inserted.

Choose the correct conductor type and number

The PUSH WIRE® push-in technology is designed for solid conductors; a different terminal series is required for fine-stranded or multi-stranded conductors.

Four or five ladders

If five conductors meet, select the REV WAGO Compact 5-way terminal block from the same Compact range.

copper and aluminum

The WAGO datasheet lists copper as the connectable conductor material; for solid aluminum conductors, WAGO lists the Alu-Plus contact paste 249-130 as an accessory, which is not included.

Assembly, testing and limits

Strip 11 mm of insulation from the conductor and insert it fully; the test port accepts standard test probes. Work on the fixed installation should only be carried out by qualified electricians and must be de-energized.

Product features at a glance

Technical data: REV WAGO compact connector, 4-way, red

Electrical and geometric values ​​refer to a single terminal and are taken from the WAGO datasheet for the 2273 series.