Who is the UA profile 100 suitable for?

It is aimed at drywall contractors and interior fitters who stiffen door openings or built-in components in metal stud walls; further profiles can be found in our Drywall Profiles category .

Areas of application and selection criteria

Typical uses of UA profiles and points you should clarify before buying:

• Bracing of door openings in stud walls
• Reinforcement for heavy door leaves or frames
• For use in walls with a 100 mm profile width
• Floor and ceiling mounting with mounting brackets
• Match the profile width to the wall system
• Adjust the length of 3.00 m to the room height
• Inquire about sheet thickness before purchasing.
• Follow the specifications of the wall and door manufacturer

Your advantage: stable bracing at door openings

UA profiles take over the loads from the door leaf and movement at door openings, which a normal stud profile alone should not be able to bear, and are firmly connected to the floor and ceiling with angles.

Select profile width and fastening

The profile width must match the framework, and suitable angles are needed for connection to the floor and ceiling.

UA 100 in wall system

The UA 100 is designed for walls with a 100 mm profile width; for narrower walls we also offer the UA 75 and UA 50.

Connection angle

For connection to floor and ceiling, there is the König mounting set for UA profiles UA 75/100 with 4 angles, 8 screws, 8 nuts and 8 washers.

Assembly and limits

UA profiles are usually made from 2 mm sheet steel; the sheet thickness, material, coating and manufacturer of this item are not specified in the tested documentation.

Product features at a glance

Technical data: UA profile 100, 3.00 m

The overview summarizes the information from the article description; the meter measurements per bundle are calculated, as manufacturer's documentation was not available.