Who is the UA profile 50 suitable for?

It is aimed at drywall contractors and interior fitters who reinforce slim stud walls with a 50 mm profile width at door openings or built-in elements; further profiles can be found in our Drywall Profiles category .

Areas of application and selection criteria

Typical uses of UA profiles and points you should clarify before buying:

• Stiffening of door openings in thin walls
• Reinforcement in the area of ​​door frames
• Use in walls with a 50 mm profile width
• Connection to floor and ceiling via angles
• Match the profile width to the framework
• Adjust the length of 3.00 m with the room height.
• Have the sheet thickness confirmed before purchase.
• Follow the specifications of the wall system and door manufacturer.

Your advantage: Stiffening even in thin walls

The UA 50 can also be used to reinforce walls with a narrow profile width at door openings, so that the loads from door operation are transferred via the floor and ceiling.

Match profile size and connection

The UA profile must match the width of the stud frame, and separate brackets are required for connection to the floor and ceiling.

UA 50, UA 75 or UA 100

For wider walls, we offer the UA profile 75 and the UA 100, each with double-row perforation.

Angles for floor and ceiling

Specifically for this profile size, there is the König mounting set for UA profiles UA 50 with 4 angles, 4 screws, 4 nuts and 4 washers.

Assembly and limits

UA profiles are usually made from 2 mm sheet steel; the sheet thickness, material, coating and manufacturer of this item are not specified in the tested documentation.

Product features at a glance

Technical data: UA profile 50, 3.00 m

The overview summarizes the information from the article description; the meter measurements per bundle are calculated, as manufacturer's documentation was not available.