Who is the 135° edge protector suitable for?

This angle is aimed at drywallers, painters and renovators who want to create neat beveled corners and wall bends in drywall construction; further profiles can be found under plaster profiles made of metal and PVC .

Applications and processing

Typical applications and processing steps:

• Protruding edges at 135° on plasterboard cladding
• Beveled wall corners and wall bends, e.g. on bay windows
• Cases and panels with beveled edges
• Edges up to 2.50 m in length without profile joint
• Cut the profile to length with tin snips before installation.
• Embed the angle completely in the filler.
• Then apply filler up to the profile head.
• For right-angled outer edges, select the 90° profile.

Your advantage: a suitable angle instead of a makeshift solution.

Because the angle is already designed at 135°, it rests against both surfaces of the panel and can be evenly embedded with filler, without the need to subsequently bend a right-angled profile. This creates a straight, durable edge even on angled corners.

Selection: Edge angle and edge type

Before ordering, check the angle of the edge and whether it protrudes or is recessed.

135° or 90°

Measure the edge angle; for right-angled outer edges, Keuck offers the GK edge protector 3000 × 23.5 × 23.5 mm .

outer or inner edge

Corner protection angles protect protruding outer edges; recessed corners, such as at the transition from the knee wall to the roof slope, generally do not receive an edge profile.

Installation and limitations

The profile is fully embedded in filler and is not intended as an exposed, visible profile. For damp rooms, please check suitability beforehand, as coated or stainless steel profiles are sometimes used in these areas.

Product features at a glance

Technical data: GK edge protection aluminium 135°, 2500 mm

The information is taken from the article description; leg length, material thickness, hole pattern and standard are not specified for this article.