REV WAGO 3-way connector with levers, grey, 10 pieces
The REV WAGO lever-operated terminal block connects up to three different types of conductors: stranded conductors from 0.08 to 4 mm² and solid and stranded conductors from 0.08 to 2.5 mm². Each terminal is opened and closed with its own lever. According to the WAGO datasheet, the rated voltage is 400 V at 32 A; one pack contains ten terminal blocks.
Who is the REV WAGO 3-way lever terminal suitable for?
It is aimed at electrical professionals who connect rigid installation cables with flexible lighting or appliance cables; further connection technology can be found in our Electrical Installation category .
Areas of application and selection criteria
Typical uses and points to check before buying:
- Transition from rigid to flexible cable
- Connection of fine-stranded lighting and appliance cables
- Fine-stranded conductors from 0.08 to 4 mm²
- Single and multi-strand conductors from 0.08 to 2.5 mm²
- Maintain a stripping length of 9 to 10 mm
- All three terminals are at the same potential
- Note the maximum ambient temperature of 40 °C.
- Work on power lines should only be carried out when the power is off.
Your advantage: each ladder can be detached individually.
Because each clamping point has its own lever, conductors can be inserted, released and reconnected individually; for just two conductors there is the REV WAGO 2-way connection terminal with levers .
Pay attention to the cross-section for each conductor type.
The upper limit of 4 mm² applies only to fine-stranded conductors; single- and multi-stranded conductors are limited to 2.5 mm².
Correctly classifying design values
WAGO specifies 400 V and 32 A for the terminal; the permissible load in the circuit is determined by conductor cross-section, installation method and protection.
Temperature at the installation location
According to the data sheet, the ambient temperature during operation must not exceed 40 °C; in warm installation situations such as light housings, you should check this value.
Assembly, space requirements and alternatives
Strip 9 to 10 mm of insulation from the conductor, open the lever, insert the conductor, and close the lever. When connecting only solid conductors, the REV WAGO Compact 3-way connector saves space; work on the mains should only be carried out by qualified electricians.
Product features at a glance
Technical data: REV WAGO 3-way connector with levers, grey
Electrical and geometric values refer to a single terminal and are taken from the WAGO datasheet for terminal 222-413.
| Brand / Manufacturer | REV Ritter / WAGO |
| Series | WAGO terminal block with actuating levers, series 222 |
| Connection technology | CAGE CLAMP®, lever operation, side wiring |
| Connectable ladder | Fine-stranded 0.08–4 mm²; solid and multi-stranded 0.08–2.5 mm² |
| Terminals / Potentials | 3 / 1 |
| Rated voltage / Rated impulse voltage | 400 V / 4 kV (Overvoltage category II, Pollution degree 2) |
| Rated current | 32 A |
| Stripping length | 9–10 mm |
| Dimensions (W × H × D) | 17 × 14.5 × 20.5 mm |
| Ambient temperature (operation) | max. 40 °C |
| Contents / Order unit | 10 clamps; 1 piece in the shop = 1 pack |
| REV item no. / Keuck item no. / EAN | 0508518555 / 13366 / 4008297085188 |
Zahlarten
Versandpartner
Baustoffe online kaufen bei Keuck Baustoffe
Keuck Baustoff GmbH & Co.KG.
ÖFFNUNGSZEITEN
Suchen Sie nach mehr