REV WAGO lever-operated 2-way connector, grey – 5 pieces
The REV WAGO double lever-operated connector directly connects two conductors of different types – for example, a solid-core installation wire to a stranded appliance or lighting cable. Stranded conductors up to 4 mm² are permitted, solid and stranded conductors up to 2.5 mm². The pack contains five connectors with a grey housing.
When the 2-way lever clamp fits
It is aimed at electrical professionals and installation companies who need to safely connect two wires of different types; the entire selection can be found in the Electrical Installation category .
Applications and test points
Before ordering, you should check these points:
- Transition from rigid to flexible cable
- Extending or connecting individual wires
- Fine-stranded conductors from 0.08 to 4 mm²
- Single and multi-strand conductors from 0.08 to 2.5 mm²
- Stripping length 9 to 10 mm
- Maximum ambient temperature during operation: 40 °C
- Side ladder entry
- WAGO 222-500 mounting adapter optional (not included)
Your benefits during assembly
Because each conductor is clamped via its own lever, individual wires can be disconnected and reconnected; if a third conductor is added, choose the WAGO 3-way lever terminal block .
The conductor type determines the cross-section
The 4 mm² applies exclusively to fine-stranded conductors; rigid single- or multi-stranded conductors may have a maximum cross-section of 2.5 mm².
What 400 V and 32 A mean
The values apply to the terminal at overvoltage category II and pollution degree 2; the current-carrying capacity of the circuit depends on the cable, installation method and protection.
Heat in the installation space
WAGO specifies a maximum ambient temperature of 40 °C for operation; this value should be checked in warm installation situations such as luminaire housings.
Connection and space requirements
Strip 9 to 10 mm of insulation from the conductor, open the lever, insert the conductor, and close the lever again. If only solid conductors need to be connected, the WAGO COMPACT 2-way connector requires significantly less space; work on the mains should be carried out by a qualified electrician.
Product features at a glance
Technical data: REV WAGO lever-operated 2-way connector, grey, 5 pieces
Electrical and geometric specifications apply to one terminal at a time.
| Brand / Manufacturer of the clamp | REV Ritter / WAGO |
| Product series | WAGO lever-operated terminal block, series 222 |
| Article numbers | Keuck item no. 13365 / REV item no. 0031920505 |
| EAN | 4006341705006 |
| Sales unit | 1 pack = 5 clamps |
| Connectable ladder | finely stranded 0.08–4 mm²; single and multi-stranded 0.08–2.5 mm² |
| Terminals / Potentials | 2 / 1 |
| Rated voltage / Rated impulse voltage | 400 V / 4 kV (IEC/EN 60664-1, Overvoltage category II, Pollution degree 2) |
| Rated current | 32 A |
| Dimensions (W × H × D) | 12.4 × 14.5 × 20.5 mm |
| Stripping length / connection technology | 9–10 mm / CAGE CLAMP®, lever actuation |
| Ambient / continuous operating temperature | max. 40 °C during operation / 85 °C |
Zahlarten
Versandpartner
Baustoffe online kaufen bei Keuck Baustoffe
Keuck Baustoff GmbH & Co.KG.
ÖFFNUNGSZEITEN
Suchen Sie nach mehr