Austrotherm UNIPLATTE 4 mm, 1300 × 600 mm – thin leveling board for retiling existing surfaces
The Austrotherm UNIPLATTE 4 mm is a construction board with a pink XPS core, coated on both sides with mortar and reinforced with fiberglass mesh. At this thickness, it primarily serves as a leveling board: for example, when a bathroom that is only partially tiled needs to be retiled to the ceiling without removing the old tiles. One board covers 0.78 m².
Who is the UNIPLATTE 4 mm suitable for?
The panel is aimed at tilers and renovators who want to redesign existing bathrooms without demolition work; further Austrotherm products can be found at Austrotherm at Keuck .
Areas of application and requirements
According to the manufacturer, the following applies to use and processing:
- Leveling plate next to existing tiles, e.g. in bathrooms tiled halfway up the wall
- Retiling floor-to-ceiling without removing old tiles
- Covering wall and floor surfaces in interior spaces
- Dry and wet areas in conjunction with composite waterproofing systems
- Substrate for thin-bed tiling
- Choose thicker panels for partition walls, wall linings or furniture.
- Do not process below +5 °C; ideal temperatures are between +15 °C and +25 °C.
- Store frost-free, in a cool, dry place and protected from sunlight.
Your advantage: new tiles without demolition
Instead of removing old tiles with all the noise and debris, you can level out the height difference with the thin panel and create a uniform surface for the new flooring. Its light weight and dust-free cutting make the job easier in occupied buildings.
Selection: the appropriate panel thickness
The thickness depends on the existing structure that the plate is intended to compensate for.
4 mm for thinly laid tiles
According to Austrotherm, old tiles are often 4–6 mm thick; therefore, measure the existing surface before ordering.
10 mm when laid in a mortar bed
If the old tiles were laid in the mortar bed that was common in the past, the manufacturer recommends UNIPLATTE 1300 × 600 × 10 mm as the suitable thickness.
Sealing and boundaries
According to the manufacturer, the UNIPLATTE, when used in a tested system with sealed butt joints, is designed for water exposure classes up to W2-I; the pink edge of the panel must then no longer be visible. The maximum application temperature is 70 °C.
Product features at a glance
Technical data: Austrotherm UNIPLATTE 1300 × 600 × 4 mm
The XPS core specifications are taken from the Austrotherm product data sheet; basis weight and processing instructions are taken from the manufacturer's documentation.
| product | Austrotherm UNIPLATTE®, 4 mm thick |
| Dimensions | 1300 × 600 × 4 mm |
| Area / Sales Unit | 0.78 m² per panel; sold individually. |
| basis weight | 2.3 kg/m² (approx. 1.8 kg per panel) |
| Construction | Pink XPS core; double-sided polymer-modified mortar with fiberglass mesh |
| Edge formation | Straight edge (GK) |
| Thermal conductivity (core) | 0.036 W/(m·K) |
| Compressive stress at 10% compression (core) | CS(10/Y) 300 kPa |
| Water absorption (core) | capillary 0; by diffusion WD(V)3 |
| Fire behavior | Class E according to EN 13501-1 |
| Application limit temperature | max. 70 °C |
| Processing / Storage | Do not process below +5 °C; store frost-free, in a cool, dry place and protected from sunlight. |
Zahlarten
Versandpartner
Baustoffe online kaufen bei Keuck Baustoffe
Keuck Baustoff GmbH & Co.KG.
ÖFFNUNGSZEITEN
Suchen Sie nach mehr
