Alujet Spritzfixx 500 ml - The turbo spray primer for rock-solid adhesive bonds

Have you ever been frustrated by the fact that adhesive tape just won't stick to a dusty OSB board or rough concrete? This is especially problematic when sealing a vapor barrier. If the connection isn't airtight, moisture damage can lead to structural problems. Alujet Spritzfixx is your ultimate solution. This powerful spray primer perfectly prepares difficult surfaces and ensures that adhesive tapes adhere instantly and permanently.

Whether wood, masonry, or concrete – with Alujet Spritzfixx, you can create an adhesive surface in seconds. It acts as a bonding agent, penetrating deep into the pores and binding dust. You save yourself the tedious task of pre-painting with a brush and long waiting times. Simply spray it on, let it dry briefly, and the tape will adhere like it's welded on. With the handy 500ml Alujet can, you're perfectly equipped for any construction site.

Why you need Alujet Spritzfixx spray adhesive

When speed is essential on the construction site, this Alujet spray adhesive is unbeatable. But it's not just about speed; Above all, it's about the safety of your structure. A primer is the foundation of any durable bond in pitched roofs or drywall construction.

Unbeatable adhesion to almost any surface

The biggest advantage is its versatility. Alujet Spritzfixxtransforms difficult surfaces such as wood fiberboard, plaster, or aerated concrete into perfect adhesive surfaces. It stabilizes the substrate and forms a grippy film that multiplies the adhesive strength of your tapes.

Precise work thanks to adjustable spray head

Are you familiar with the problem of overspray landing everywhere but where it's supposed to? Not here! The Alujet 500ml can features an adjustable valve. You can direct the spray pattern horizontally or vertically. This allows you to work cleanly, avoid material waste, and protect adjacent components.

Lightning-fast cooling time for maximum work progress

Time is money. While liquid primers often take hours to dry, this spray primer is ready for bonding after just 5 to 10 minutes, depending on the temperature. You can maintain your workflow and avoid forced breaks.

Applications and areas of use

Alujet Spritzfixx is far more than just a simple adhesive. It's a system component for the airtightness of your house.

1. Vapor barriers & vapor retarders: Secure the connections of your foils to masonry or wooden studs.

2. Underlayment membranes: Optimize the bonding of overlaps on rough formwork.

3. Wood fiberboards: Primer for the secure fixation of sealing tapes on porous board joints.

4. Concrete & Plaster: Binds construction dust and creates a smooth surface for adhesive connections.

Whether you are looking for an Alujet spray adhesive for light assembly work or a real adhesion promoter for critical sealing - with this Alujet ml specification of 500ml you get concentrated power in one can.

Professional instructions: How to use the Spritzfixx correctly

The best thing about Alujet Spritzfixx ? It's incredibly easy to use. Simply follow these steps for perfect results:

• Preparation: The surface should be dry, load-bearing, and free of coarse dirt or ice.

  Shake: Shake the Alujet 500ml vigorously before use.

• Spraying: Spray the primer evenly onto the surface from a distance of approximately 20-25 cm. Use the adjustable head for corners.

• Allow to dry: Wait approximately 5-10 minutes (depending on the weather) until the adhesive is finger-thick (it should be sticky but no longer stringy).

• Apply : the adhesive tape. Press it firmly into place. Done!

Why you should buy Alujet Sprühfixx at Keuck-Baustoffe

We know what matters on the construction site. We don't just sell you a can of glue, we sell you peace of mind for your construction project.

• Fresh product: We pay attention to the minimum shelf life to ensure your adhesive delivers its full performance.

• Lightning-fast shipping: We know you're in a hurry. Your order will be processed immediately.

• Expert support: Do you have questions about compatibility with specific films? We're happy to advise you!

• Fair prices: Alujet brand quality at conditions that won't break your budget.

Alujet Spritzfixx FAQ - Your questions, simply explained

Q: Can I use Spritzfixx as a regular adhesive?

A: Yes, absolutely! It works perfectly as a contact adhesive. Spray both surfaces, let it dry briefly, and press the parts together. It will hold incredibly well.

Q: Does Alujet Spritzfixx also adhere to damp wood?

A: For best adhesion, the wood should be surface dry. No primer in the world can work effectively on a frozen or wet surface. A quick test will save you trouble later.

Q: How long does a 500ml can of Alujet last?

A: That depends on the absorbency of the surface. It's extremely economical on smooth surfaces. Generally, one can is sufficient for the connections in an average single-family home.

Q: Do I need a protective mask when spraying?

A: As with all spray products, we recommend good ventilation. Indoors, you should briefly open the windows or wear a simple dust mask to avoid directly inhaling the spray mist.

Q: Can I also use this to glue EPS or Styrofoam?

A: Caution! The solvents in Alujet spray adhesive could damage polystyrene foams. Test it beforehand in an inconspicuous area or use a special Styrofoam adhesive.